OT, NT, T Series

OT, NT, T Series

These rollers can withstand high static loading over long periods of time, often carrying the full load weight for more than a year with no adverse effects. Because loads are spread over a wide area and carried by the load plate and the contact rolls, rollers are ideal for many applications requiring the frequent movement of heavy loads.

Top Styles

These rollers come in a variety of capacities, frame and top styles.  They can easily be modified for any application.

Oversized Top
Overhang side to side
Flush Top
Add extra strength to the frame and offer a variety of mounting capabilities
Narrow Top
Overhang front to back
No Top Plate
Lower height and lighter weight

FRAME TYPES

The OT, NT, T Rollers are fabricated from high strength steel.  Load plates of 37.5-ton and higher capacities undergo a special machine process to minimize side-to-side movement of chain.  The rollers can also be used inverted, as static conveyors.

INDIVIDUAL CAPACITIES (TONS)
  • .75
  • 1
  • 2.5
  • 5
  • 8
  • 15
  • 20
  • 37.5
  • 50
  • 75 

View Specs

 

Thumbnail

The ERF Roller has no top plate and is often used where a trunnion mount is required, where an existing “foot pad” will become the roller’s top plate, or where the load has a built-in cavity mount. Used upside down, the ERF Rollers become a heavy-duty conveyor allowing the load to slide with extremely low friction.

INDIVIDUAL CAPACITIES (TONS)
  • 1
  • 4
  • 12
  • 30
  • 65
  • 100
  • 125 

View Specs

 

Thumbnail

The Wide Body Rollers are wider and shorter in overall length.  They are typically used when the OT, NT or T roller might be too long or if a larger contact area is desired.  WB Rollers utilize two separate chains that provide a wider footprint.  Increasing the footprint means the load is spread over a greater area, thus minimizing ‘point’ loading.

INDIVIDUAL CAPACITIES (TONS)
  • 10
  • 20
  • 30
  • 60
  • 90
  • 125

View Specs

Thumbnail

The Super Heavy Duty Rollers are the highest capacity rollers that Hilman offers as standard models.  150 & 200 Ton frames come in Long (L) or Wide (W).  Wide frame versions are offered with one complete (wide) chain or with two individual chains with a center plate (C) dividing them.

INDIVIDUAL CAPACITIES (TONS)
  • 100
  • 150
  • 200
  • 300
  • 500
  • 750
  • 1000 

View Specs

Thumbnail

Options & Modifications

There are several options & modifications that can be applied to this roller series.  We can also create a complete custom design to suit your specific project.

  • Thumbnail

    MOUNTING

    OT and NT are available with standard bolt-on or welded mounting hole patterns. The top plates add extra strength to the frame and variety to mounting capabilities, making one type ideal for cavity mount, bolt-on or weld mount.

  • Thumbnail

    ACCU-ROLL BLOCK

    This roller series has the option available to add two end-blocks on either end of the roller frame.  The end-blocks have a drilled and tapped hole pattern that allows for the addition of an external guidance system (Accu-Roll) later on.  In many cases, guidance systems can be interchanged.  These models can be particularly handy for users who frequently need to change the type of track that the rollers will ride upon.  

     

  • Thumbnail

    TURNTABLES & ROCKER TOPS

    Additional components for OT and NT rollers include Turntable and Transverse and Longitudal Rocker tops.  Turntables & Rocker tops are particularly advantageous in applications where the rolling surface is imperfect.  In applications where the rollers with Accu-Roll are required to follow a slightly irregular or skewed track, they provide the ability to navigate the track without binding.  They are available in 5 to 75 tons or can be completely customized to fit your project.  Learn more about our Custom Tops.