OT, NT, T Series | High Strength Steel Chain Rollers
OT, NT, T Series
Top Styles
These rollers come in a variety of capacities, frame and top styles. They can easily be modified for any application.
FRAME TYPES
The OT, NT, T Rollers are fabricated from high strength steel. Load plates of 37.5-ton and higher capacities undergo a special machine process to minimize side-to-side movement of chain. The rollers can also be used inverted, as static conveyors.
INDIVIDUAL CAPACITIES (TONS)
- .75
- 1
- 2.5
- 5
- 8
- 15
- 20
- 37.5
- 50
- 75

The ERF Roller has no top plate and is often used where a trunnion mount is required, where an existing “foot pad” will become the roller’s top plate, or where the load has a built-in cavity mount. Used upside down, the ERF Rollers become a heavy-duty conveyor allowing the load to slide with extremely low friction.
INDIVIDUAL CAPACITIES (TONS)
- 1
- 4
- 12
- 30
- 65
- 100
- 125

The Super Heavy Duty Rollers are the highest capacity rollers that Hilman offers as standard models. 150 & 200 Ton frames come in Long (L) or Wide (W). Wide frame versions are offered with one complete (wide) chain or with two individual chains with a center plate (C) dividing them.
INDIVIDUAL CAPACITIES (TONS)
- 100
- 150
- 200
- 300
- 500
- 750
- 1000

The Wide Body Rollers are wider and shorter in overall length. They are typically used when the OT, NT or T roller might be too long or if a larger contact area is desired. WB Rollers utilize two separate chains that provide a wider footprint. Increasing the footprint means the load is spread over a greater area, thus minimizing ‘point’ loading.
INDIVIDUAL CAPACITIES (TONS)
- 10
- 20
- 30
- 60
- 90
- 125

NATIVE CAD DRAWINGS
We offer native 3D CAD drawing files on most of our standard models for download. For modifications or custom drawings please contact us directly so we can assist you with the files you need.
